Our Bunkhouse Bunk Beds are heavy duty and are used for
youth, tween, teen, college students and adults.
This is the
most popular bunk bed for homes, college dorms, off-campus
apartments, fraternity & sorority houses, cabins and
camps.
We also provide our bunks for hotels, fire/police stations
and
summer/sports camps.
We custom build each bunk bed to your exact specifications,
so it will fit any ceiling height and any mattress thickness.
Lifetime Warranty.
We manufacture them
in twin, full and queen sizes.
To get the
maximum space
between the bunks, the bottom mattress starts
at 10" from the
floor and the top mattress is based on what you
specify on the
order form. If you want the bottom mattress to be
set a little higher
or lower, you can specify it in the "Custom
Specifications" box
provided during checkout.
We can also custom build you a Triple Bunk
Bed. You will need to
have at least a 9'
ceiling to get enough space between the bunks.
Product Specifications
Our Bunkhouse Bunk Beds are an all solid wood
construction.
They are made from kiln-dried heat-treated
Spruce grown in the
Pacific Northwest. It is a
special grade that is specifically
selected for us. Since it grows in a
cooler climate, it has fewer
knots and
the boards stay nice and straight better
than other
wood species. The legs and rails are 2x6,
ladder rungs are 2x4
and the
Safety Rails are Solid Clear (knot free) Pine.
Our tongue & groove construction gives our beds
extreme support
and stability. End ladders are notched, screwed and
bolted to the
bed rails. The bed is assembled with screws and 3/8"
carriage
bolts, no nails that will come loose over time. This
makes for an
extremely sturdy and heavy duty bunk bed that will
hold up to the
toughest youth, teen and adult environment.
We provide a mattress foundation (bed slats) that go
length of
the bed with a gap of 3" between the slats.
The Weight Capacity
is 1000 lbs. per level.
The bed comes unfinished, sanded and ready for paint or stain.
Mattress not included.
Our beds follow the Consumer Products
Safety Commission
Bunk Bed
Guidelines. For bunk beds for home use we provide
safety rails on all
four sides with a small opening to climb in.
You may climb into
the loft using the built-in ladders at each end
or with
our optional front ladder.
Available in Twin Over Twin, Full over Full, Queen
over Queen,
Twin over Full, Twin over Queen and Full over Queen.
Frequently Asked Questions
Can your bunk bed be separated into two separate low beds?
Yes and no. Our bunk bed legs (corner posts) are made from one
piece solid wood that supports both levels. This is what makes our
beds very sturdy. The stackable bunk beds sold by most
manufacturers just don't have the stability of solid one piece leg.
So yes, you can take our bunk bed and cut the legs to
make it
into two beds, but you can't make it back into a bunk bed.
I already have one
of your bunk beds, can I make it into two
separate loft beds? Yes.
We have a that will
allow you to
remove the bottom bunk and use it to make it into a
separate loft bed.
Click to order.
I already have one
of your loft beds, can I convert it to a bunk
bed? Yes, we have a
available which will add a
bottom bunk to your loft bed.
Click to order.
Our Bunkhouse Bunk Beds follow the
Consumer Products
Safety Commission Guidelines and are used in
kid's
bedrooms, college dorms, fraternity houses,
firehouses,
cabins, camps and hotels.
The bunk bed shown on the left is being used by a
"Family Room"
catering to families
with children and college students.
Multiple Size Bunk Beds
We also have Twin over Full, Twin over Queen and
Full over Queen Bunk Beds. Pictured at left is a
Twin over Full Bunk Bed.
The outside dimensions of the bunks beds are:
Twin Regular over Full 59" x 88" and Twin XL over Full 59" x 92"
Twin over Queen and Full over Queen 65" x 92"
- Beds are ordered by mattress size. For
example, the Twin Regular will hold a mattress that
is up to 39" wide and 75" long. See other sizes below. Click
to view loft dimensions.
- Mattress not included. You do not need to use a Box Spring with our loft beds.
- Most colleges use a Twin Extra Long
39" x 80" mattress that is 6" thick.
- After selecting the
loft size you must scroll down and enter your specifications and then
press
below. You can then do a Continue Shopping to add more
.
- All beds come with our standard 73" tall legs. You may increase them with our
taller leg
options below. Use our
to see how much
headroom you will get.
- All beds include our
(see picture →) and have a weight capacity of 1000 lbs. Mattress Foundation
- The
may be added to the bed and
are require for lofts used by children.
-
All beds come with our
, click
for more information.
-
All beds are unfinished, sanded and ready to be painted or stained to match any decor.
-
All accessories including desks, bookshelves and ladder
may be installed either on the left or right side.
After adding the loft bed to the cart, you may add more accessories
to by clicking
Please Note: We are aware that there are a few problems with some
internet browsers that will not allow you to add some accessories to your order.
If this occurs you can go to the
page and add them to your cart or
you can give us
a call at 866-739-2331 and place the order over the phone. The problems
typically occur when using a Mac computer, smart phones and some Mozilla and Chrome
browsers. We are working on the problems and hope to have them fixed
shortly.
The Ordering Process Has 4 Steps
Step 1: Select Size & Specifications
Step 2:
Select Optional Accessories
Step 3:
Select Shipping & Order
Processing Options
Step 4: Add to Shopping Cart
Step 1: Select Size & Specifications
Select Bunk Bed Size
What size should I use?
Twin over Twin (Single) Full over Full (Double) Queen over Queen
Regular
39"
x 75" $409
54"
x 75" $469
XL Extra Long
39" x
80" $429
54"
x 80" $489
60"
x 80" $519
Twin over Full
39"
x 84" $529 Twin Regular 75" mattress length over Full Regular 75" mattress length
Twin over Queen
39"
x 88" $569 Twin Regular 75" mattress length over Queen XL 80" mattress length
Full over Queen
54"
x 88" $589 Full Regular 75" mattress length over Queen XL 80" mattress length
How
Much Space Will I Get Above and Between the Bunks?
We custom build each bed to your exact specifications, so it depends on your ceiling
height and mattress thickness. For example, if you have an
8' Ceiling and a 6" Mattress, you will get 58" Headroom Underneath (to
the floor) & 30" Above.
Click
to use our
to see how much
headroom you will get using your specs.
Note: To get the most space
underneath consider using our Extra Tall 85" Legs.
We normally set the headroom above the mattress to 30" (unless
you specify something different below).
For most people 30''
headroom above is adequate and most colleges also recommend 30" headroom above.
For the lower bunk, we typically set the mattress at 10" from the floor.
Using the above example of 58"
space
underneath and 6" mattress, it will then be 16" from the floor and will give you
42" of
space between the bunks.
What Is Your Ceiling Height?
We need this information to calculate how much headroom you will get above and
underneath.
96"
(8')
Standard Ceiling
108"
(9') Ceiling
Custom:
Inches
Select Leg Height
We have two leg heights, Standard 73" Legs and if you would like
more space underneath, Extra Tall 85" Legs.
If the legs are too tall for your
specifications then we will cut them
at 2" above the safety rail to fit
based on your specifications.
Please
let us know if you do not want the legs cut.
Please
if you need legs taller than 85".
Standard 73" Legs (x73)
For ceilings up 8'
Extra
Tall 85" Legs (x85) $39.00
For ceilings greater than 8' or when adding
additional safety rails
Select Leg Top Design
Our standard beds come with Square Top Legs. The Round Top
Legs adds a nice decorative look and is very popular with loft beds for
kid's bedrooms. If you order the Round Top and the
Double Bookshelf Headboard, the footboard legs will be Round Top and the Double
Bookshelf Posts will be half-round, click on the picture at left for more
detail. We will also
provide a bracket to mount the Clock Shelf to the side of the leg.
Square Top Legs
Round Top
Legs $19
Select Safety Rails
We follow the Consumer Products Safety Commission (CPSC) Guidelines
for Bunk Beds
Dorm Use: The CPSC guideline is if the bed is used in an
adult institutional environment (ie. college dorm),
one Safety Rail must be
installed on the front (long) side and must be at least 5" above the top of the
mattress. We refer to these as Dorm Use Beds. To save space,
most dorm beds are placed up against a
wall, however, if your bed will not be up against a wall, we recommend a Safety
Rail on the Back Side also.
Home Use: The CPSC
guideline for home or
apartment beds (for children and adults) is that safety rails are required on all four sides
with a small opening to enter the loft. The top of the safety rail must be
at least 5" above the top of the mattress and there can not be any openings
larger
than 3˝" anywhere
above the mattress foundation. We refer to these as Home Use
Beds.
Each Safety Rail Set contains 4 safety rails, one for each of the sides.
The number of
Safety Rail Sets required is based on the thickness of the mattress.
All of our Bunkhouse Bunk Beds have Solid Pine Safety Rails
and are premium
grade knot free clear pine. They are sanded and ready to be painted or
stained.
Dorm Use Bed
$9
One
Safety Rail on Front Side Only
$19 One Safety Rail on Front and Back Side
Home Use Bed
$69
Safety Rails for Mattress up
to 8" Thick (2 sets)
$89 Safety Rails for
Mattress up to 16" Thick (3 Sets)
Select Additional Safety Rail Sets - Home Use Bed
If your
mattress is greater than 16" thick or if you have young (pre-teen) children and would like the safety rails to be more than 5" above the top of the mattress, we
also offer additional safety
rail sets that go 10" and 15" above the top of the mattress.
You need to first select the
(above) to be able to add
additional sets of safety rails.
No
Thanks
$29 Additional
Safety Rails to go 10" Above the Mattress
$49 Additional Safety Rails to go 15" Above the
Mattress
What Is Your Total Mattress Thickness?
Enter the total thickness of your mattress and any mattress
topper. We need this information to make sure we leave enough room for the
safety rail(s) above the top of the mattress. If your mattress is in-between one
of these values, use the higher value. For example, if your mattress is 7
inches, select 8 inches.
6"
8"
10"
12"
14"
16"
How Much Space Do You
Want Above and
Between The Top And Bottom Bunk?
If
you select Maximum, we will position the mattress at the top of the legs leaving
enough room for the
safety rail(s) and giving you a minimum of 30" of headroom above. You may also enter a
custom value below.
The bottom mattress starts at 10" from the floor.
If you want the bottom mattress to be set a little higher or lower, you can
specify that in the "Custom Specifications" box provided during checkout.
Click
to use our
to see how much
headroom you will get using your specifications.
Maximum
Custom:
Inches
Step 2: Select
Optional Accessories
Single Bookshelf & Double Bookshelf Headboard
Double Bookshelf
Headboard
The Single
goes underneath and the Double
Bookshelf goes above the mattress and
serves as
the headboard. They may be assembled at either end of the bed.
They are our most popular options for
our Bunk Beds. Buy
a Single Bookshelf and Double
Bookshelf Headboard and get
a free Clock Shelf (save $5).
You can add
additional bookshelves by going to our
page.
Note: You may install the Double Bookshelf
Headboard at either end of the bed.
No Thanks
Single Bookshelf
Single Bookshelf
(SB) $29
Double
Bookshelf Headboard
(DB) $39
Single
& Double & free Clock Shelf (SDC) $68
(save $5)
Desktop & Desk Shelf
The Desktop goes
the width of the bed and may be installed on either end of the bed. It is
available in MDF or
Shipping
