If this bed is to be used in an institutional
environment (dorm room), a single safety rail must be installed on the front
(long) side, and if the back side is not firmly up against a wall, a back safety
rail must be used. If this bed is not in an institutional environment, then
safety rails must be installed on all 4 sides with an opening to be able to
climb in. The customer must follow the assembly instructions.
Since College Bed Lofts cannot control the quality
of the assembly nor modifications made to the loft, Eastbay Solutions Group,
LLC, web: College Bed Lofts will not be held legally liable from any accidents, injuries
or property damage resulting from the use of our beds.
No horseplay, jumping or
leaning over the edge is allowed on our beds. You must use the ladder to climb
up into the upper bunk.
of the very nature of sleeping on an elevated surface, there are obvious and
inherent risks involved due to falling. This
risk is enhanced when consciousness is limited or impaired due to sleep, lack of
sleep, illness, consumption of alcohol, taking medications, inhalation of
smoke/fumes or similar factors. The loft is an all natural wood product and will
burn when fire or sufficient heat is present. Elevated beds may also
create obstructions or impediments that increase the hazards encountered in a
fire or other emergency by hindering evacuation or fire suppression activities.
Customers who choose to use our bed shall be deemed to have assumed all risks
of accidents, injury and property damage associated with their placement and use.
As a general safety precaution do not place the loft
near any window, door, closet, fire/smoke alarm or ceiling fan.
All college residence halls have specific
requirements regarding the use and placement of lofts and students are required
to follow all college requirements.
The safety rail must be in use at all times!
College Bed Lofts™
and Dream Higher™
are trademarks of Eastbay Solutions Group, LLC