Need help or to order by phone call Don at 866-739-2331 M-F 9-4 ET   

or email or click here and we will call you   

   

  

Return to

Previous Page

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Enhanced Solid 2x6 Back Rail

 

To save space, the back (long side) of most loft and bunk beds are placed up against a wall.  Because of this, we use plywood for the back rail, which is wider (9-1/2") than the front rail and gives the loft extreme support and stability.  If you are planning on placing the bed away from the wall so the back is visible and if you want the back to look exactly like the front, we have an Enhanced Solid 2x6 Back Rail available.  Also, if you place the loft in front of a window the Enhanced Solid Back Rail is narrower (5-1/2") and will bring more light into the room. The Enhanced Solid Back Rail replaces the plywood back with a solid 2x6 (same width as the front rail). 

 

When using the Enhanced Solid Back Rail, the holes that are drilled into the front and back rails are at a higher location on the rail.  The front rail will be positioned 3" lower than normal, however, you will get the same amount of headroom above and underneath the bed slats.  If this is confusing please give us a call at 866-739-2331 and we can review it with you.

 

Shown below is what the back of the bed looks like with a Plywood Back Rail and the Long Shelf Backboard.

 

 

 

 

With the Enhanced Solid Back Rail, the back will look exactly like the front.